UV rejection describes ultraviolet transmission
UV rejection describes the share of incident ultraviolet radiation prevented from passing through the tested glass-and-film system. It does not describe how much visible light passes through, or how much total solar heat is rejected. For a product comparison, ask for the measured wavelength range and the test method alongside the percentage, rather than treating a large headline number as a complete specification.
VLT describes the visible-light side
Visible light transmittance, or VLT, describes the proportion of visible light transmitted by the glazing system. A higher VLT generally means a lighter appearance under comparable conditions. Confirm whether the figure is for film alone or film applied to a stated glass type. The intended window, visibility needs and applicable local requirements all matter when choosing a shade.
TSER describes solar-energy rejection
Total solar energy rejected, or TSER, addresses a broader energy question. It includes reflected solar energy and the portion of absorbed energy that is released outward. UV rejection alone cannot establish this value, and a single-wavelength infrared reading is not a substitute. Compare TSER only when the glazing and test conditions are sufficiently aligned; it is not a direct prediction of cabin temperature.
Use the demonstration to ask better questions
The interactive model on this site uses clearly labeled demonstration inputs to explain these different quantities. Moving a slider changes the illustration, not a laboratory result for a YUNNIAN product. For a purchase decision, request the exact film code, shade, glass specification and current data sheet, then review them together with a physical sample.

